Filter
Top Products
Setup Options -Units
11.0 UNITS
The UNITS page allows the operator to select the units preferred for operation.
Select a unit from each of the windows:
1- Area Units; 2- Length; 3- Speed; 4- Weight; 5- Volume;
6- Injection- applies when ‘Injection’ is selected as one of the ‘Tank Modes’.
7- Pressure- applies when an electronic pressure sensor is installed on the sprayer.
QQuuiicckk
SSeett
Allows the operator to quickly change all the units to all Metric units or Imperial units or US
units or Canada units.
The operator can still change the units to suit their operation.
LLoocckk
NNHH33
CCaalliibbrraattiioonn
FFaaccttoorr
aatt
ppuullsseess
ppeerr
llbb-
This option allows the operator when applying
Anhydrous Gas and the Calibration Factor on the NH3 Regulator Valve is in lb’s (Pulses per lb
of N), but the operator wants to work in (kg of N) then select this box.
So the operator enters the Calibration Factor (pulses per lb of N), see Section 4.0; selects the
UNITS/Weight to ‘kg’, then the sprayer software will convert the (pulses per lb of N) and
display ‘kg of N’ on the ‘Working Screen’
Select this option if one of the ‘Tank Modes’ is set to NH3 and the operator has manually
entered a Calibration Factor in (pulses per lb of N) and selected ‘kg’ on the UNITS/Weight, see
Section 6.0.
Page 71
V1.98 21/06/06
FFiigguurree
4455::
OOppttiioonnss-
UUnniittss
ppaaggee