Filter
Top Products
The switch box functions are only available if enabled in the OPTIONS/SWITCHES page,
see Section 5.0, if connecting the KEE External Switch Box to the ‘Spray ECU’. The
Switchbox connects to the 9 pin plug marked ‘SWITCH BOX’. When the External Switch
Box switches are enabled, the equivalent ‘Working Screen’ buttons on the ZYNX Sprayer
‘Working Screen’ become disabled.
SSEECCTTIIOONNSS
SSwwiittcchheess-
The section switches turn the boom sections ON or OFF.
(Up - OFF / Down - ON). The red LEDs next to each section switch turn ON when spraying
and ‘Flash’ when the boom section is switched ON, but the ‘Master’ switch is OFF.
MMAASSTTEERR SSwwiittcchh
Turns all selected boom sections ON or OFF. (Up - OFF / Down - ON).
AAUUTTOO-MMAANN-
Turns the system from automatic mode to manual.
(Up - Manual / Down - Auto).
IINNCC
-
DDEECC-
Each toggle changes the
rraattee
either up or down by the preset Increment Rate
whilst in the Auto mode. (Up - INC / Down - DEC). When in the manual mode it increases
and decreases the system
pprreessssuurree
. (Up - INC / Down - DEC).
PPAARRAALLLLEELL-
When using guidance in conjunction with your ZYNX Spray rate controller you
can use this button in lieu of the ‘PARALLEL’ button on the ZYNX screen. You still must
select point ‘A’, point ‘B’, on the ZYNX screen.
GGUUIIDDEE
LLOOCCKK-
When using guidance in conjunction with your ZYNX Spray rate controller
you can use this button in lieu of the ‘GUIDE LOCK’ button on the ZYNX Guidance screen.
Setting Up- Sprayer Switch Box
17.10 Sprayer Switchbox
Page 93
V1.98 21/06/06
6 Section Switches
Master Switch
Auto/Manual Switch
Increase/Decrease
Parallel Guidance
Guide Lock
Figure 62: Sprayer Switchbox