Filter
Top Products
Setup Options- Switches
8.1 SWITCHES (Spray ECU Only)
The ‘Boom Sensing’, ‘Section Switches’ and ‘Switch Mapping’ windows will only appear if
‘Spray ECU’ is selected on the CONFIG/Controller page.
BBoooomm
SSeennssiinngg
Select ‘No Sensing’, if no external section switches are connected to the ‘Spray ECU’.
Select ‘Six Boom Switchbox’, if the Sprayer Switchbox is connected to the connector marked
‘SWITCHBOX’ on the ‘Spray ECU’ box.
Select ‘ECU Sense Inputs’ if customised section switches are connected to the ‘CONNECTOR 2’
connector on the Spray ECU.
SSeeccttiioonn
SSwwiittcchheess
Select the ‘Calculator Pad’.
Enter in how many physical section switches are connected to the ‘Spray ECU’ box.
Select ‘Enter’ to save and close the window.
SSwwiittcchh
MMaappppiinngg
Select ‘One Section For One Switch’ if the number of sections entered in the
SPRAYER/Guidance Sections, is the
ssaammee
as the number of section switches entered into
SWITCHES/Section Switches.
Select ‘Preset Mapping’ if the number of sections entered in SPRAYER/Guidance Sections, is
mmoorree
than the number of section switches entered into SWITCHES/Section Switches and the
operator prefers the Spraying software to work out which section switches control particular
section valves.
Select ‘Custom Section Mapping’ if the number of sections entered in SPRAYER/Guidance
Sections, is
mmoorree
than the number of section switches entered into SWITCHES/Section Switches
and the operator prefers to customise which section switches turn OFF particular section
valves.
Note: When ‘Custom Section Mapping’ is selected, the button ‘Switch To Section Mapping’
will become available and accessible.
Select ‘Switch To Section Mapping’ button to advance to the ‘Custom Section Mapping’
window.
Page 62
V1.98 21/06/06
FFiigguurree
3377::
OOppttiioonnss-
SSwwiittcchheess
ppaaggee
((SSpprraayy
EECCUU
oonnllyy))