Filter
Top Products
STE 58760
－ －
3-42
e) When the file name at the bottom of the screen is correct, press the [Exec] key once again.
If the file name is incorrect, press the [Bs] key to move the cursor to the field of the file
name, correct the file name, and then press the [Exec] key.
At that time, the LCD displays the program of the file. When a new file is specified, "new
file is created" appears at the bottom of the screen.
PROGRAM SAMPLE
MOVE P1
MOVE P2
END
_
-----[ SAMPLE 1 5 ]
f) Press the [F1] key on the teach pendant. At that time, the system exits from the edit mode
and enters the data editor mode. When position data have been taught to the file, the data
are displayed. When the position data have not been taught to the file, "no data exist" is
displayed.
----- POINT/World ----------------- No exist data
_
By pressing the [F1] key, the system returns back to the program edit mode.