Filter
Top Products
STE 58760
－ －
3-31
Example)
An example of a batch processing which reads files from a floppy disk.
File name: FLOAD. BAT
LOAD PRO1
LOAD PRO2
LOAD PRO3
LOAD PRO4
LOAD PROS
LOAD PRO6
To execute the above batch file, enter the following from the teach pendant.
[F] [L] [O] [A] [D] [Exec]
When the batch processing is executed, the controller reads the file PRO1 to PRO6 from a
floppy disk to the RAM drive in the controller.
Note 1)
In the external automatic mode, batch files cannot be executed from the teach pendant.
Note 2)
As opposed to selecting a program, batch files cannot be selected or executed using external
input signals.
Note 3)
Unless a batch file is in the controller RAM drive, it cannot be executed.
3.5.2 Automatic Execution File
A batch file which is executed just after the controller power is turned on is called an automatic
execution file. The contents of the automatic execution file are just like any other batch file,
although the file name of the automatic execution file is AUTOSTR. BAT.
The automatic execution file can be used to select a file in the external automatic mode. For
details of how to edit files, see 3.2, "Changing File Data".