Filter
Top Products
STE 58760
－ －
3-25
Note 1)
All the auxiliary signal lines should be set for all six points.
Note 2)
The parameters of this data are effective only for auxiliary signals which are operated by the
teach pendant. Even if a double solenoid is specified, signals are not exclusively output in the
automatic operation mode. In this case, create a program so that the signals are exclusively
output.
Note 3)
When the power is turned on, even if the double solenoid has been specified, the output signal
is in the off state.
(15) Selection of storage
Selects either a floppy disk unit or a personal computer substituting for the floppy disk unit.
Example)
When the floppy disk unit is used, set [0].
(16) Not used (spare)