Filter
Top Products
STE 58760
－ －
3-37
3.6.3 Reset Timing of Program Execution Environment
The program execution environmental data are reset under the following conditions.
①
When the program is cold-started.
②
When a file other than the present file is selected as the execution file.
(When the same file as the present file is selected again, the program execution
environment is not reset.)
③
When the program reset operation is executed.
④
When the program is hot-started. (No global variable is initialized, however.)
When the power is turned off before the automatic operation is completed, the global variable
data may be lost.
To execute the program from the initial state, use the "RESET PROG" command.
To execute the program in the initial state when the power is turned on, specify the "RESET
PROG" command for the automatic execution file (file name: AUTOSTR, BAT).