Filter
Top Products
STE 58760
－ －
3-6
3.2 CHANGING FILE DATA
To edit files including the system configuration file, use the screen editor function. The basic
operation of the screen editor is as follows:
(1) Turn on the main power of the controller and place the MASTER MODE KEY switch on the
control panel in the "MANU" position. The following controller monitor command menu
appears at the bottom of the teach pendant LCD display.
>
■
EDIT LOAD SAVE TESTRUN> RESET NEXT
F1 F2 F3 F4 F5 F6
(2) Whenever you press the teach pendant "F6" key, the monitor command menu changes
accordingly. Repeat this key operation until the "EDIT" command appears.
NEXT
F6