Filter
Top Products
STE 58760
－ －
3-11
Note)
Before exiting the edit function, check that the edited data is correct.
(8) Starting up the controller with the edited file. In order to validate (make effective) the
changes, first turn off the main power and then hot start the controller.
Note 1)
Before changing the contents of a file, it is recommended to back up the file with a floppy disk.
For details of how to back up a file, see 5.5, "Backing Up Files".
Note 2)
If the contents of the system configuration file were changed for the worse when they were
edited, read the CONSTRUC. SYS file from the attached system disk of the controller and
conduct the edit operation all over again. For details of how to load the file, see 5.5, "Backing
Up Files".