Filter
Top Products
STE 58760
－ －
3-30
Note 1)
"AUTO"
in the "Available mode" column represents the internal automatic mode, the external
automatic mode, and the test operation mode. "MANU" represents the manual mode (all
modes beside the automatic modes listed above).
Note 2)
When any command which is not effective in the current mode is used, an error occurs and the
command will not be executed. In this case, any command where an error occurs is skipped
and the remaining commands are executed in sequence.
Note 3)
When a batch processing is specified in another batch processing, the former batch processing
is complete when the last command of the latter batch processing being called is complete.
Note 4)
In the automatic operation mode, batch processing cannot be executed.
Note 5)
Controller operation which are effective in a batch processing are as follows:
EMERGENCY STOP, SERVO ON, and SERVO OFF
Note 6)
Commands specified for batch processing are immediately processed without any prompt to the
operator such as "Press Y key to delete the file".
In a batch file, commands of the controller should be listed in the order of the execution. For
details of how to edit a file, see 3.2, "Changing File Data".
Any batch file is executed by entering its name (without the extension) from the teach pendant
just like with any command.