Filter
Top Products
STE 58760
－ －
3-8
If incorrect data has been entered, press the "Bs" key to delete the immediately preceding
character.
(5) Press the "Exec" key on the teach pendant. The number of files being stored in the
RAM drive of the controller, the number of empty bytes of the memory, and the name of the
file to be edited appear on the LCD display. If an incorrect file name has been entered, by
using the "Bs" key, move the cursor to the incorrect character and correct the file name.
<< SR-X Screen Editor Ver. 2.00 >>
1. Number of RAM file : 1
2. Free Memory Size : 34998
-----[ ]
Edit file : CONSTRUC.SYS _
F1 F2 F3 F4 F5 F6
When the file name is correct, press the "Exec" key. The contents of the current file appear on
the LCD display.
(6) Change the contents of the file which appear on the LCD display. Using the screen editor,
move the cursor to a character to be changed and conduct the edit operation. The cursor
position is indicated with a character which blinks alternately in black and white or with a
underline which simply blinks.
The edit operation is conducted in the following methods.
(a) Selecting the insert or replace mode:
The mode where characters being entered are inserted just before the cursor position is named
the insert mode. In the insert mode, a character where the cursor is indicated with a blinking
underline. The mode where old characters are replaced with those being entered is the
replace mode. In the replace mode, the cursor is positioned blinks alternately in black and white.