Filter
Top Products
STE 58760
－ －
3-43
g) By pressing the [F4] key, the edit data are changed from the position data (POINT/World)
to the coordinate data (TRANS) and the load data (PAYLOAD). At that time, select the
coordinate data (TRANS). When the coordinate data have been taught to the file, the
data are displayed. When the coordinate data have not been taught to the file, message
"no exist data" is displayed.
----- TRANS ------------------------ no exist data
_
h) Input a coordinate name to be taught. By using the alphanumeric keys, input a coordinate
name to be taught. At that time, the coordinate name being taught is displayed at the
bottom of the LCD display.
To change the coordinate data which have been taught, by using the cursor keys [
↑
] and
[
↓
], select the coordinate name of the coordinate data to be changed. When the
coordinate name is selected by using the cursor keys, it is reversely indicated.
i) Teach coordinate data
①
In case the coordinate data are input with numeric values.
Input values of axes X, Y, Z, and C following the coordinate name displayed at the bottom of
the LCD display.
"TABLE 1
= 10, 20, 30, 45"
Coordinate name X Y Z C