Filter
Top Products
STE 58760
－ －
3-52
c) Press the [B] key while the [Alt] key is held. At that time, the base coordinate system
currently selected is displayed at the bottom of the LCD screen.
.system =0.000,0.000,0.000,0.000
TABLE1 =10.000,10.000,0.000,0.000
TABLE2 =20.000,20.000,0.000,0.000
TABLE3 =30.000,30.000,0.000,0.000
TABLE4 =40.000,40.000,0.000,0.000
TABLE5 =50.000,50.000,0.000,0.000
----- TRANS/Base Select -------------------------------
Current : .system =0.000,0.000,0.000,0.000
d) By using the cursor keys [
↑
] and [
↓
], reversely indicate the coordinate name of the
coordinate data to be selected and then press the [Exec] key. The coordinate data being
selected are selected as the base coordinate system and then the former screen appears.
TABLE1 =10.000,10.000,0.000,0.000
TABLE2 =20.000,20.000,0.000,0.000
TABLE3 =30.000,30.000,0.000,0.000
TABLE4 =40.000,40.000,0.000,0.000
TABLE5 =50.000,50.000,0.000,0.000
----- TRANS ----------------------------------------------
TABLE1
To not select the base coordinate system, press the [Esc] key.
e) Quit
By pressing the [F4] key, the edit data are changed from the coordinate data (TRANS) to
load data (PAYLOAD) and position data (POINT/World). To subsequently teach other
data, select a desired mode in accordance with the data to be taught.
To return the system back to the program edit mode, press the [F1] key.
To quit the file edit mode, press the [X] key while the [Alt] key is held.