Toshiba STE 58760 Welding System User Manual


 
STE 58760
3-15
[9.] SPECIFY FOR OPERATE MODE IN EXTERNAL AUTO.
{=0:EXT. SIGNAL, =1:COMPUTER} (I)
=0
[10.] NOT USE
=0
[11.] SPECIFY FOR EXTERNAL FILE SELECTION SIGNAL.
{1<=CH NO.<=24,1<= LENGTH <=8} (I)
=17 8
[12.] SLOW SPEED RATE {0< RATE <100} (C) [%]
[13.] MODE OF SERIAL CHANNEL. {2ND CH. TO 5TH CH.}
{LOGICAL CHANNEL NAME = PRT | HOST| COM1 | COM2 | COM3 | COM4} (C)
{NO USE. SPARE} (I)
{PROTOCOL SELECTION
, =0:FREE RUN CONTROL,
, =1:SIMPLE PROTOCOL WITH SUM CHECK,
, =2:SIMPLE WITHOUT SUM CHECK, } (I)
{TRANSMIT SPEED =9600 | 4800 | 2400 | 1200} (I) [BPS]
{CHARACTER BIT = 7 | 8} (I)
{PARITY BIT =0:W1THOUT,=1:ODD,=2:EVEN} (I)
{STOP BIT =1 | 2} (I)
= "PRT" 0 0 1200 7 2 1 {MODE OF CHANNEL COM1}
= "COM1" 0 0 2400 7 2 2 {MODE OF CHANNEL COM2}
= "HOST" 0 1 2400 8 1 1 {MODE OF CHANNEL COM3}
= "COM2" 0 0 4800 7 2 1 {Not used}