Filter
Top Products
STE 58760
－ －
3-33
Procedure:
(1) Start the controller using the cold start operation.
(2) Insert the floppy disk containing the files into the FDD unit.
(3) Read the batch file to the controller.
[C] [O] [P] [Y] [ ] [A] [:] [A] [L] [O] [A]
[D] [.] [B] [A] [T] [ ] [R] [:] [Exec]
(4) Execute the batch file.
[A] [L] [O] [A] [D] [Exec]
After that, batch processing is executed, which causes the system configuration file
(CONSTRUC. SYS), system parameter file (SYSTEM. PAR), user parameter file (USER. PAR),
and any program files whose extension is ".PRO" to be read to the RAM drive of the controller.
Note)
Save files on a floppy disk other than the system disk. To prevent the contents of the system
disk from being accidentally altered, it is strongly recommended to place the write protect tab of
the floppy disk in the write disable position.