Filter
Top Products
STE 58760
－ －
2-3
Note)
The disk provides a write-protection tab which prevents the user from mistakenly erasing the
contents. When using the system disk, prior to inserting it into the FDD, make sure to slide the
write-protection tab outward. When the tab is in the outward position (figure (a)), data cannot
be written on the floppy disk. On the other hand, when the tab is in the inward position (figure
(b)), data can be written on the floppy disk. In any case, slide the tab all the way until a click
sound is heard.
(3) Turn on the MAIN POWER switch on the control panel.
Turn on the MAIN POWER switch on the control panel. When the main power is turned on,
the POWER LED will light up.
Note)
Should the "POWER LED" not light even if the MAIN POWER switch is turned on, or should
any fault occur, immediately turn off the MAIN POWER switch and check the cables connected
to the controller.