Managing Exchanges
102 PATROL DashBoard User Guide
To Create a NetFlow Exchange
1 In the Network portion of the navigation tree, right-click the Exchange root under
the Cisco router under which you want to create a new NetFlow exchange.
2 Choose New => Exchange.
The Exchange Creation screen is displayed, as shown in Figure 41:
Figure 41 NetFlow Exchange Creation Screen
3 In Exchange Label: Specify the label that you want displayed in the navigation tree.
4 In Choose Source, use one of the following options to specify the source:
■ IP/Range/Subnet: Specify the IP address, the range of IP addresses, or the IP
address and mask for the source (for example, an IP address and mask might be
192.168.54.0/255.255.255.0).
■ Select a Group: Specify the source group from the list.
