Managing Interface Properties
154 PATROL DashBoard User Guide
To Modify Individual CoS Properties
1 In the Network portion of the navigation tree, right-click the CoS and choose
Properties.
The Class of Service Properties screen is displayed, as shown in Figure 77:
Figure 77 Class of Service Properties Screen
2 In Label, specify a new label to be displayed in the navigation tree.
3 In Bandwidth, enter the CoS bandwidth. This value is usually obtained during the
discovery procedure; however, it can be either unavailable or inexact in the device
MIB. If you need it, enter the correct value to ensure that the input and output
indicators of this CoS use the most appropriate scales.
4 In Notifications, specify the type, if any, of notifications that you want:
■ E-mail: Select the check box to send threshold-crossing e-mail notifications for
each indicator.
■ SNMP: Select the check box to send threshold-crossing SNMP traps to the SNMP
managers.
5 In Other Properties, select Enable Polling to collect the object counters.
6 Click Apply Changes.
Managing ToS Root Properties
You can set or modify the properties of an individual ToS root, as well as being able
to set properties globally.
