Setting Global Properties for an Object Type
116 PATROL DashBoard User Guide
The DLCI Properties screen is displayed, as shown in Figure 49:
Figure 49 DLCI Properties Screen (Global)
3 (optional) In Display Objects Containing, enter a string of characters to restrict the
Dlci list to the objects including this string in their name (you can use wildcard
characters).
4 (optional) In Dlci List, select specific objects for which you want to set properties.
Select multiple objects by clicking them while pressing the
Ctrl or Shift key.
5 (optional) To remove objects from PATROL DashBoard, click Delete Selected
Objects
.
6 (optional) In CIR, specify a new value for the committed information rate (CIR), the
transfer rate at which a network transfers data under normal conditions.
This value is collected from the device, but you can modify it.
7 (optional) In EIR, specify a new value for the excess information rate (EIR), the
transfer rate for data in excess of the data transferred at the CIR.
This value is collected from the device, but you can modify it.
