Setting Global Properties for an Object Type
Chapter 5 Managing Object Properties 135
4 (optional) In Virtual Lan List, select specific objects for which you want to set
properties.
5 (optional) In Notifications, specify whether you want notifications to be sent when
threshold crossings are detected:
■ To send notifications to e-mail addresses, select E-mail.
■ To send notifications as traps to SNMP devices, select SNMP.
6 (optional) In Other Properties, select Enable Polling to periodically collect the object
counters.
7 Click Apply Changes.
The Information box displays any error messages that occur after you apply changes.
To Set Global Properties for Virtual Private Network Roots
1 In the Device Configuration portion of the navigation tree, click Global Properties.
The Global Properties object-type selection screen is displayed, as shown in
Figure 46 on page 111.
2 Select Virtual Private Network Root and click OK.
