Setting Global Properties for an Object Type
Chapter 5 Managing Object Properties 133
To Set Global Properties for Virtual LAN Roots
1 In the Device Configuration portion of the navigation tree, click Global Properties.
The Global Properties object-type selection screen is displayed, as shown in
Figure 46 on page 111.
2 Select Virtual Lan Root and click OK.
The Virtual LAN Root Properties screen is displayed, as shown in Figure 62:
Figure 62 Virtual LAN Root Properties Screen (Global)
3 (optional) In Display Objects Containing, enter a string of characters to restrict the
Virtual Lan Root List to the objects including this string in their name (you can use
wildcard characters).
4 (optional) In Virtual Lan Root List, select specific objects for which you want to set
properties.
5 (optional) In Notifications, specify whether you want notifications to be sent when
threshold crossings are detected:
■ To send notifications to e-mail addresses, select E-mail.
■ To send notifications as traps to SNMP devices, select SNMP.
■ To use the same type of notifications for objects that are subordinate to the
selected ones, click
Apply Notifications on The Object and All Sub Objects.
