Managing Interface Properties
Chapter 5 Managing Object Properties 153
4 In Notifications, specify the type, if any, of notifications that you want:
■ E-mail: Select the check box to send threshold-crossing e-mail notifications for
each indicator.
■ SNMP: Select the check box to send threshold-crossing SNMP traps to the SNMP
managers.
5 In Other Properties, select Enable Polling to collect the object counters.
6 Click Apply Changes.
Managing CoS Group Properties
You can set or modify the properties of an individual CoS group, as well as being able
to set properties globally.
To Modify Individual CoS Group Properties
1 In the Network portion of the navigation tree, locate the appropriate Cisco device
and then locate the CoS group below it.
2 Right-click the CoS group and choose Properties.
3 In the CoS Group Properties screen, complete the fields:
■ Name: Specify a name for the CoS group.
■ Type: Select CoS Group.
■ Bandwidth: Specify the bandwidth for this CoS group.
4 Click Apply Changes.
Managing CoS Properties
You can set or modify the properties of an individual CoS, as well as being able to set
properties globally.
