Setting Global Properties for an Object Type
Chapter 5 Managing Object Properties 119
The Vc Properties screen is displayed, as shown in Figure 51:
Figure 51 Vc Properties Screen (Global)
3 (optional) In Display Objects Containing, enter a string of characters to restrict the Vc
List
to the objects including this string in their name (you can use wildcard
characters).
4 (optional) In Vc List, select specific objects for which you want to set properties.
5 (optional) In Notifications, specify whether you want notifications to be sent when
threshold crossings are detected:
■ To send notifications to e-mail addresses, select E-mail.
■ To send notifications as traps to SNMP devices, select SNMP.
■ To use the same type of notifications for objects that are subordinate to the
selected ones, click
Apply Notifications on The Object and All Sub Objects.
6 In Bandwidth, specify the available bandwidth for this group of VCs.
7 (optional) In Other Properties, select Enable Polling to periodically collect the object
counters.
8 Click Apply Changes.
The Information box displays any error messages that occur after you apply changes.
