Filter
Top Products
8-37
A2677 Rev 1.5
X20 Sprayer Reference Manual
Sensors
Pressure
Please note: Normal operation is with Tank 1, but the system
can control up to 3 separate tanks. The above screen shows the
page as shown when Spray Interface is selected as the controller
(page 8-7); see page 8-42 also if Spray ECU was selected as the
controller (page 8-7).
If Pr. Sense was selected on the Sprayer page (page 8-15) for
a Tank then this page allows the type of sensor installed on the
Sprayer to be selected.
If only one tank has been selected on the Spayer>Pr.Sense
window then make sure that when selecting the Type that Tank 1 is
selected.
To select the tank the Pressure sensor is connected to, use the
arrows (◄►) to display the correct tank.
Figure 8-11. Options>Sensors Page