Filter
Top Products
10-17
A2677 Rev 1.5
X20 Sprayer Reference Manual
Flow Meter Setup
Calibrate the Flow Meter using one of the following methods:
Flow Calibration for normal valves (see below) •
Flow Calibration for balanced (Hardi) type valves (see page •
10-19)
Manual entry of Calibration Factor (see page 8-38).•
Calibrating the Flow Meter
Disconnect a line from one valve going to a Boom Section 1.
Connect a line from the valve to the measuring container 2.
(20 liter drum)
Select the Speed Readout 3.
Set a test close to normal spraying speed4.
Figure 10-6. Working Screen Showing
Calibrate Tank Window
Boom
Section
Selected
Speed
Readout
Calibrate
Tank
Window
Tank 1
Icon