Filter
Top Products
8-42
www.topconpa.com
X20 Sprayer Reference Manual
Sensors (Spray ECU Only)
Pressure
When Spray ECU is selected as the controller (page 8-7) there
are 2 extra types of Pressure sensors available: Current and
Voltage.
If 5 Bar or 10 Bar are selected in the Type window then the
Calibration Method window and the Sensor Specifications
button in the Pressure window are not displayed.
Select the type of Pressure sensor connected to the Sprayer.
Check the Pressure Sensor manufacturers details to select the
correct type of Pressure Sensor.
If Current or Voltage is selected then the Calibration Method
window is displayed (Figure 8-14 on page 8-43).
Figure 8-13. Options>Sensors Page>
ECU Conguration