Filter
Top Products
8-60
www.topconpa.com
X20 Sprayer Reference Manual
Press the SET button (Figure 8-20 on page 8-57) to save all changes.
Once an alarm has been changed and the SET button has been
selected. The alarm changes can be undone by selecting the UNDO
button (Figure 8-20 on page 8-57).
Tank Low Alarm %
The Tank Low Alarm is set at a percentage of the total volume.
The Total Volume is set from the Working screen, see “Tank
Setup”, page 10-13.
Use the mouse to set the Tank Low Alarm %, by selecting the
arrows (▲▼) next to the value (Figure 8-20 on page 8-57).
Test Tank
Select the Test Tank button (Figure 8-20 on page 8-57) to preview
the alarm sound, duration, cycles etc.
Reselect the Test Tank button to turn test OFF.
Defaults
• Restore Defaults—resets the alarm you have selected, to the
factory setting
• Restore All Defaults—resets all alarms to the factory settings.
See Table 8-3 (page 8-61) for information on the alarm defaults.