Filter
Top Products
8-53
A2677 Rev 1.5
X20 Sprayer Reference Manual
Setup (Spray ECU Only)
Enable Pump Control Button
The Enable Pump Control Button option is displayed when
Spray ECU is selected as the controller (page 8-7) and when
Prop. Valve (Proportional Valve) (page 8-14) and Pr. Sense
(Pressure Sensor) (page 8-15) are selected.
When the Enable Pump Control Button option is selected an
extra button to the left of the Master Switch on the Working
screen, called PUMP will be displayed.
When the PUMP button is switched OFF, on the Working screen
the proportional valve closes (by setting the PWM to zero) and
stops the oil flow to the pump.
See page 16-1 for more information.
Figure 8-18. Options>Setup Page>
ECU Conguration