Filter
Top Products
5-8
www.topconpa.com
X20 Sprayer Reference Manual
Installing the Sprayer Harness
Figure 5-5 on page 5-10 shows the Sprayer Harness and Valve
Harness Assembly.
Connect the connector on the Sprayer Harness to the Tractor 1.
Harness, at the back of the tractor or vehicle
Continue to run the Sprayer Harness across the Sprayer’s 2.
chassis, to the valve set
Sprayer Harness Connectors
The typical Sprayer Harness has 5 connectors (Figure 5-5 on
page 5-10), which are labelled:
• Ground Speed—connects to the Shaft/Speed Sensor Kit
(supplied in kit)
• Flow Meter 1—connects to a Flow Meter (not supplied in
kit)
• Pressure Sensor 1—connects to the Pressure Sensor
(supplied in kit)
• Reg Valve 1—connects to a Regulator Valve (not supplied
in kit)
• Valve Harness—connects to the Valve Harness (supplied in
kit).
WARNING
Do not cut or splice the Sprayer Harness; all
excess cable should be strapped away to avoid
vibration and wear.
WARNING