Filter
Top Products
8-58
www.topconpa.com
X20 Sprayer Reference Manual
Selecting the Alarm
Select the alarm you wish to change from the drop down list, by
pressing the arrow (▼) (Figure 8-20 on page 8-57).
The example (Figure 8-20 on page 8-57) shows the Rate Alarm
selected; the changes made will apply to this alarm only.
Alarm Type
Select the preference for the type of alarm:
• Never Alarm—switches the selected alarm OFF
• One alarm cycle only—will alarm only once while the alarm
condition is present
• Limited repeats—when a number is entered next to it eg. ‘2’
then while the alarm condition is present it will only alarm
for 2 cycles
• Repeat while present—the alarm will keep alarming while
the alarm condition is present.
Audio Alarm
Select the preference for the type of audio:
• None—no audio alarm, only an Alarm window will be
displayed on the console showing the type of alarm
WARNING
All critical alarms should be set to "Repeat
while present."
WARNING