Filter
Top Products
5-14
www.topconpa.com
X20 Sprayer Reference Manual
If necessary, protect the Shaft/Speed Sensor and wiring from
damage by welding or bolting a suitable plate over them.
If required, use the 3-Pin Weather Pack Extension provided, by
connecting the Shaft/Speed Sensor to either the Ground Speed
connector on the Tractor Harness or Sprayer Harness.
Figure 5-7. Shaft/Speed Sensor with Mounting Bracket
NOTICE
Damage to the front face of the Shaft/Speed Sensor
will stop the speed readout and prevent the controller
from working.
NOTICE
NOTICE
If the Shaft/Speed sensor is mounted on a steered
wheel, then make sure the sensor moves with the
steering mechanism, to maintain constant clearance
between the magnets and the sensor when the wheel
is turning from lock to lock.
NOTICE