Filter
Top Products
8-7
A2677 Rev 1.5
X20 Sprayer Reference Manual
Simulation is selected for desktop use when the console is not
connected to the Spray ECU. This disables all the alarms.
The COM Ports are greyed out if the Spray Rate software is not
registered, contact Topcon to register your software.
Controller
Select Spray Interface if one of the following is written on the
Spray Rate Controller:
KEE Spray Rate Interface •
ZYNX 5500 Interface •
ZYNX 2500 Interface •
Select Spray ECU if Spray ECU is written on the Spray
Controller.
If Spray ECU was selected see pages 8-10, 8-33, 8-42 and 8-53
also.
Using Injection ECU
Before selecting Using Injection ECU an additional Chemical
Injection pump has to be purchased and an additional Multi Drive
Electronic Control Unit (MDECU) and harnesses would also be
required.
This option, with the appropriate hardware will allow all the Spray
ECU’s to control up to 3 injection tanks if connected to a 4 channel
MDECU.
Please note: A Supplement Manual will be required to install the
Chemical Injection Pump.