Filter
Top Products
5-1
A2677 Rev 1.5
X20 Sprayer Reference Manual
Installing the Spray ECU
(all models)
This chapter is for first time operators of the Sprayer software. If you
are an operator who is installing upgrades to your existing software
(Spray Rate Interface or Spray ECU is already installed) please ensure
you have read Chapter 4, and then continue to Chapter 7.
WARNING
Damage will occur if any external power is
applied to the Section Drive Outputs on the
Sprayer ECU.
WARNING
TIP
Follow the following procedures carefully, to ensure
that no damage is done.
TIP
WARNING
Disconnect both the X20 console and Spray ECU
controller, from the battery, before charging,
jump starting or welding on the vehicle and/or
Sprayer.
WARNING