Filter
Top Products
5-17
A2677 Rev 1.5
X20 Sprayer Reference Manual
Connecting to a Flow Meter
The Flow Meter (not supplied in kit) is installed between the
Regulator Valve and the Section Valves. The Flow Meter will
be installed so that it measures only the quantity of liquid being
delivered to the spray line.
Connect the Flow Meter 3-Pin Connector to the 3-Pin 1.
connector marked Flow Meter 1 on the Sprayer Harness
(Figure 5-5 on page 5-10)
CAUTION
Care should be taken when replacing these
connectors, not to damage the Sprayer Harness or
Flow Meter and connectors should be fully circuit
tested prior to installation.
CAUTION
NOTICE
The Flow Meter may require a connector change to
attach to the 3-Pin connector marked Flow Meter 1 on the
Sprayer Harness. Refer to the Flow Meter manufacturer’s
specifications for correct pin allocation.
NOTICE
NOTICE
There must be no return line to tank or pump after the
Flow Meter.
NOTICE