Filter
Top Products
8-52
www.topconpa.com
X20 Sprayer Reference Manual
Pump Options
Select Enable Pump Speed Indicator (Figure 8-16 on page
8-46) when a speed sensor is fitted to the pump to readout the
RPM of the pump shaft.
If Enable Pump Speed Indicator is selected enter in a Min. and
Max RPM value for the Pump Shaft (by selecting the relevant
calculator icon). An alarm will be displayed when the pump
speed falls below the set minimum RPM value and above the set
maximum RPM value.
Enable Speed Smoothing
By default Enable Speed Smoothing is enabled. Under normal
spraying operations this should not be changed.
If a need arises for faster response to vehicle acceleration and
deceleration then deselect the box.
The rate displayed on the screen may fluctuate more
when the Enable Speed Smoothing option is disabled.
NOTICE
NOTICE