Filter
Top Products
10-5
A2677 Rev 1.5
X20 Sprayer Reference Manual
Manual Entry has to be selected as the Calibration Method (page
8-43).
When the Calibration Method is set to Manual Entry, the Pressure
Sensor factors can be entered using the Sensor Specifications
button on the Options>Sensors page or they can be entered by
selecting the CALIBRATE SENSOR button on the Tank Pressure
window. Both buttons perform the same function and either button
can be used to enter the Pressure Sensor factors.
See page 8-43 for an explanation on entering the Pressure Sensor
factors.