Filter
Top Products
5-21
A2677 Rev 1.5
X20 Sprayer Reference Manual
The typical Valve Harness has the following connectors, which
are labelled as follows:
There are different Valve Harness’, depending on which type of
Section Valves are fitted on the Sprayer.
Connect the Valve Harness to the Sprayer Harness. 1.
• Dump 1—connects to the Dump Valve
• Section X—connects to the Section Valves. ‘X’
represents the section number
• Sprayer Harness—connects to the Sprayer Harness.
WARNING
If the Valve harnesses need to be re-terminated,
because the connectors are different to the section
valves being connected to, then you should
ensure the Sprayer Harness is disconnected from
the Tractor Harness. Otherwise damage to the
Spray ECU will occur if the wires are shorted out
during the installation.
WARNING
NOTICE
Use the cable ties provided to secure the
Power/Comms Harness away from hot and moving
parts, and to avoid chaffing and wear.
NOTICE