Filter
Top Products
5-22
www.topconpa.com
X20 Sprayer Reference Manual
Single Line Install
Connect the connectors marked Section X to the correct 1.
section valves
• Section 1— connects to the section valve on the far left
• Section 2—connects to the next section valve, and so
forth, until all the section valves are connected to the
Valve Harness
The section valve with the highest number will operate •
the Boom Section on the far right.
2. Cable-tie the spare connectors to the Valve Harness.
Dual Line Install
Connect the connectors that operate the primary Spray 1.
Line (Spray A)
Section 1 will operate the section on the far left of the
spray line (when facing forward) and the highest number
section valve on Line A will operate the far right Boom
Section.
TIP
TIP
If there are too many connectors for the section
valves use the connectors with the lowest
numbers first.
Use the lowest numbers first.
TIP
TIP