Filter
Top Products
11-9
A2677 Rev 1.5
X20 Sprayer Reference Manual
For ASC to work the Auto Section Enabled option has to be
enabled (page 8-1) in the Sprayer software. When Auto Section
Enabled has been selected then the ASC Master button will
appear on the Topcon Logo Bar, on the Guidance Working
screen. The ASC Master button will not function unless ASC has
also been enabled in the Guidance software General Setup (see
Guidance Manual).
When the ASC Master button is green then the ASC control
will control sections ON or OFF as required. When the ASC
Master button is red then the ASC control will be disabled and
the switching OFF and ON of sections will be performed by the
operator. Therefore the ASC can be left enabled in the Guidance,
and enabled or disabled from the Guidance Working screen by
selecting the ASC Master button.
Please note: The sections switch OFF when the Boom Section is
fully over an already mapped (applied) area. The sections also
switch ON so that there is no untreated areas left.