Filter
Top Products
18-7
A2677 Rev 1.5
X20 Sprayer Reference Manual
Problem
Incorrect pressure reading
Causes Solutions Tips
18. Bad pressure
calibration
Check selection of
correct pressure sender
and calibration
Conrm range
selected is what is
required ie: most
systems use kpa, but
if Bar is
selected, the reading
is 1/100 th of the
value
Problem
Rate and Pressure do not match unless whole Boom is ON
Causes Solutions Tips Additional Data
19. Balanced
Valves is
selected
Deselect
Balanced
Valves if
balanced
valves are not
used
HARDI use
balance valves,
most other
Sprayers use a
normal shutoff
valve
Yes, see
Additional
Data, Problem
19, page 18-15.