Filter
Top Products
5-16
www.topconpa.com
X20 Sprayer Reference Manual
Ensure that the Shaft/Speed Sensor is firmly attached and
protected so that it cannot be damaged by wire or stones. If
necessary cover the Shaft/Speed Sensor with a plate.
If required, use the 3-Pin Weather Pack Extension provided,
by connecting the Shaft/Speed Sensor to either the Ground
Speed connector on the Tractor Harness or Sprayer Harness.
Using an Existing Radar Speed Sensor for
Ground Speed
An optional Radar Sensor Interface Harness (A449−not provided
in kit but can be ordered separately) allows direct connection to
any existing Radar Speed Sensor on the tractor.
Connect the 1. Radar Sensor Interface Harness to the Ground
Speed connector on the Tractor Harness or Sprayer
Harness
Connect the other end of the wire to the signal wire from 2.
the Radar Sensor (not provided in kit) to enable the Spray
ECU to read the speed.
If required, use the Extension Harness provided, by connecting the
Radar Sensor to either the Ground Speed connector on the Tractor
Harness or Sprayer Harness.
CAUTION
Check the Radar Sensor Manufacturer’s manual
before attempting connection.
CAUTION