Filter
Top Products
10-11
A2677 Rev 1.5
X20 Sprayer Reference Manual
• Sub Area Number—displays the selected Sub Area Number. The
Sub Area Number is displayed in the Area window and in the
Sub Area and Sub Volume Readouts
The Sub Area Number is selected by using the Sub Area Number
Selector arrows (◄►) (Figure 10-4 on page 10-10). By using
the arrows you can select from 10 Sub Areas (0-9). As the Sub
Area Number changes the Sub Area and Sub Volume values will
change to display the areas and volumes accumulated for the
selected Sub Area Number.
Select the calculator icon aligned next to Area or Volume to
enter a preset value.
Selecting the Reset button next to the Area or Volume allows
the area and volume (weight) to be reset individually for the Sub
Area Number selected.
Please note: The Sub Volume units reflect which Tank Mode was
selected for each tank Liquid, NH3, Granular or Injection (page
8-14) and also the units that are selected (page 8-55).
If only one tank is selected then the Sub Area/Volume readouts are for
Tank 1. If more than one tank is selected, then the operator can elect to
display the Sub Area/Volume readouts for each tank. When more than
one tank is selected arrows (◄►) appear next to the Tank Number,
the arrows are used to select a tank number. The Sub Area/Volume
readouts will display the area covered and volume used for each tank,
on both the Working screen and Area window readouts. As the arrows
are used to select the Tank number you will notice the Tank Indicator
on the Working screen will change to show which Tank the Sub Area/
Volume readouts are displaying.