Filter
Top Products
10-6
www.topconpa.com
X20 Sprayer Reference Manual
Flow
The Volume Readout (Figure 10-2) displays Volume/Minute or
Volume/Nozzle, depending on which option is selected from the Flow
window (Figure 10-2).
There is a Volume Readout displayed for each Tank (1,2 and 3)
selected. The example shown in Figure 10-2 shows a Volume readout
for Tank 1 and Tank 2 because there are 2 tanks selected. The number
on the left hand side of the Volume Readout displays which tank the
Volume Readout is displaying.
The units displayed are determined by the units selected on the
Options>Units page (page 8-55) and whether, Liquid, Granular,
Injection or NH3 (page 8-14) was selected for the Tank Mode.
By selecting the Volume Readout the Flow window is displayed on
the right side of the screen (Figure 10-2).
Figure 10-2. Working Screen Showing
Flow Window
Volume
Readout
for Tank 1
Volume
Readout
for Tank 2
Flow
Window