Filter
Top Products
7-7
A2677 Rev 1.5
X20 Sprayer Reference Manual
Check the number of Guidance sections used, in the 5. Guidance
window, and change if necessary, see page 8-28
Enter the swath width of the Spray Boom, on the 6. Sections
page, by entering in the Section widths of each of the Boom
Sections, see page 8-25
Enter the number of nozzles on each Boom Section, on the 7.
Sections page, see page 8-28
Enter the Minimum Flow value of the nozzles fitted to the 8.
Spray Line, on the Sections page, check nozzle chart, see page
8-29
Enter the Flow Calibration factor for the Flow Meter, on the 9.
Sensors page, see page 8-39
Enter the Flow Meter's Minimum Flow value, check the Flow 10.
Meter’s specifications, on the Sensors page, see page 8-40
Enter the Wheel Calibration, on the 11. Setup page, see page 8-46
You may change the Units, on the 12. Units page, to suit your
preferences, see page 8-55
Save changes to the User Configuration, see Chapter 913.