Filter
Top Products
10-7
A2677 Rev 1.5
X20 Sprayer Reference Manual
The current number of nozzles is displayed. The number of nozzles are
set from the Options>Sections page (page 8-28).
The number of nozzles does not affect Sprayer Operation. The number
of nozzles is used to calculate an average flow rate per nozzle. This is
displayed in the Volume Readout when the Display Volume/Nozzle
button is selected from the Flow window (Figure 10-2 on page 10-2).
Display Volume/Minute is displayed in the Volume Readout when the
Display Volume/Minute button is selected from the Flow window
(Figure 10-2 on page 10-2).
Range (Spray ECU 2 only)• —shows the actual Pulse Width
Modulation (PWM) applied to the Hydraulic Valve as a
percentage (%)
Please note: The Range is only displayed for the Tanks or Tank
which have Proportional Valve selected as the Controller (page
8-14).
• Time Left—these windows display the approximate spraying
time left (in hh:mm), before the tank is empty, taking into
account the current speed, volume left in tank, sections ON and
widths and application rate. Each Tank has its own Time Left
display, the number of Time Left windows is determined by the
number of Tanks selected. ‘OFF’ is displayed where the time
(hh:mm) is normally displayed, when the Tank is switched OFF
or the Master is switched OFF.