ADDITIONAL DESIGN FEATURES
(Stick & Wire Model only)
FOR WIRE WELDING
• One constant voltage position for all wire welding. A
12 to 45V range across the entire current output
range.
• Excellent arc characteristics with MIG (GMAW) and
Inner shield (FCAW) welding.
• A Wire Feeder connector for quick connection of the
control cable.
• A built in “Electronic Contactor” for “Cold” electrode
when not welding.
• The 3 digit display has the additional feature of pre-
setting the open circuit voltage and displaying the
actual voltage during welding.
•
Designed for use with the following Lincoln wire feeders.
•LN-25 •LN-23P •LN-7
•LN-8 •NA-3 •Spool Gun &
K488 Module
WELDING CAPABILITY
The Commander 400 is rated at 400 amps, 40 volts at
100% duty cycle. The weld current is variable from 40
to 575 amps.
OPERATION
B-4 B-4
COMMANDER 400
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC