xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
124
Parameters
id - Specifies the port group ID.
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
name - Specifies the port group name.
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete the port group which ID is “2”:
DGS-3420-28SC:admin# delete port_group id 2
Command: delete port_group id 2
Success.
DGS-3420-28SC:admin#
6-11 show port_group
Description
This command is used to display the port group information.
Format
show port_group {id <value 1-64> | name <name 16>}
Parameters
id - (Optional) Specifies the port group ID.
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
name - (Optional) Specifies the port group name.
<name 16>
- Enter the port group name here. This name can be up to 16 characters long.
If not specified parameter, will show all the port group.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show all the port group information: