xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
458
Chapter 43
Jumbo Frame
Commands
enable jumbo_frame
disable jumbo_frame
config jumbo_frame ports [<portlist> | all] state [enable | disable]
show jumbo_frame {<portlist>}
43-1 enable jumbo_frame
Description
This command is used to enable support of Jumbo Frames.
Format
enable jumbo_frame
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable Jumbo Frames:
DGS-3420-28SC:admin#enable jumbo_frame
Command: enable jumbo_frame
DGS-3420-28SC:admin#
43-2 disable jumbo_frame
Description
This command is used to disable support of Jumbo Frames.
Format
disable jumbo_frame