xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
649
DGS-3420-28SC:admin# config power_saving state enable
Command: config power_saving state enable
Success
DGS-3420-28SC:admin#
66-2 show power_saving
Description
This command is used to display power saving information.
Format
show power_saving
Parameters
None.
Restrictions
None.
Example
To display power saving information:
DGS-3420-28SC:admin#show power_saving
Command: show power_saving
Power Saving State: Enabled
Length Detection State: Enabled
DGS-3420-28SC:admin#