xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
302
DGS-3420-28SC:admin# delete host_name www.example.com
Command: delete host_name www.example.com
Success.
DGS-3420-28SC:admin#
26-7 show host_name
Description
This command is used to display the current host name.
Format
show host_name {static | dynamic}
Parameters
static – (Optional) Specifies to display the static host name entries.
dynamic – (Optional) Specifies to display the dynamic host name entries.
Restrictions
None.
Example
To display the static and dynamic host name entries:
DGS-3420-28SC:admin# show host_name
Command: show host_name
Static Host Name Table
Host Name IP Address
------------------------------ ---------------
www.example.com 10.10.10.10
www.exampla.com 20.20.20.20
Total Static Entries: 2
Dynamic Host Name Table
Host Name IP Address TTL
------------------------------ --------------- --------
www.examplc.com 30.30.30.30 60 minutes
www.exampld.com 40.40.40.40 10 minutes
Total Dynamic Entries: 2
DGS-3420-28SC:admin#